リファレンス / vpc-router
コマンド一覧
- Basic Commands
- Power Management Commands
- Monitoring Commands
- Other Commands
list
Usage
Usage:
list [flags]
Aliases:
list, ls, find, select
Flags:
=== Filter options ===
--names strings
--tags strings
=== Limit/Offset options ===
--count int (aliases: --max, --limit)
--from int (aliases: --offset)
=== Zone options ===
--zone string (*required)
=== Input options ===
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
create
Usage
Usage:
create [flags]
Flags:
=== Common options ===
--name string (*required)
--description string
--tags strings
--icon-id int
=== Plan options ===
--plan string (*required) options: [premium/highspec/highspec4000] (default "premium")
=== Vpc-Router-specific options ===
--boot-after-create
--dhcp-server string
--dhcp-static-mapping string
--dns-forwarding string
--firewall string
--internet-connection-enabled
--l2tp string
--port-forwarding string
--pptp string
--site-to-site-vpn string
--static-nat string
--static-route string
--syslog-host string
--users string
--version int (*required) (default 2)
--vrid int
--wireguard string
=== Network options ===
--public-network-interface-ip-addresses strings
--public-network-interface-ip-aliases strings
--public-network-interface-switch-id int
--public-network-interface-virtual-ip-address string
--private-network-interfaces string
=== Zone options ===
--zone string (*required)
=== Wait options ===
--no-wait
=== Input options ===
-y, --assumeyes Assume that the answer to any question which would be asked is yes
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
Parameter Examples
{
"Zone": "tk1a | tk1b | is1a | is1b | tk1v",
"Name": "example",
"Description": "example",
"Tags": [
"tag1=example1",
"tag2=example2"
],
"IconID": 123456789012,
"Plan": "premium | highspec | highspec4000",
"Version": 2,
"PublicNetworkInterface": {
"SwitchID": 123456789012,
"IPAddresses": [
"192.0.2.21",
"192.0.2.22"
],
"VirtualIPAddress": "192.0.2.101",
"IPAliases": [
"192.0.2.102"
]
},
"PrivateNetworkInterfaces": [
{
"SwitchID": 123456789012,
"IPAddresses": [
"192.168.0.11",
"192.168.0.12"
],
"VirtualIPAddress": "192.168.0.1",
"NetworkMaskLen": 24,
"Index": 1
}
],
"RouterSetting": {
"VRID": 1,
"InternetConnectionEnabled": true,
"StaticNAT": [
{
"GlobalAddress": "192.0.2.101",
"PrivateAddress": "192.168.0.1",
"Description": "example"
}
],
"PortForwarding": [
{
"Protocol": "tcp | udp",
"GlobalPort": "22",
"PrivateAddress": "192.168.0.11",
"PrivatePort": "22",
"Description": "example"
}
],
"Firewall": [
{
"Send": [
{
"Protocol": "tcp | udp | icmp | ip",
"SourceNetwork": "192.0.2.1 | 192.0.2.0/24",
"SourcePort": "1024 | 1024-2048",
"DestinationNetwork": "192.0.2.1 | 192.0.2.0/24",
"DestinationPort": "1024 | 1024-2048",
"Action": "allow | deny",
"Logging": "True",
"Description": "example"
}
],
"Receive": [
{
"Protocol": "tcp | udp | icmp | ip",
"SourceNetwork": "192.0.2.1 | 192.0.2.0/24",
"SourcePort": "1024 | 1024-2048",
"DestinationNetwork": "192.0.2.1 | 192.0.2.0/24",
"DestinationPort": "1024 | 1024-2048",
"Action": "allow | deny",
"Logging": "True",
"Description": "example"
}
],
"Index": 0
}
],
"DHCPServer": [
{
"Interface": "eth1",
"RangeStart": "192.168.0.240",
"RangeStop": "192.168.0.244",
"DNSServers": [
"133.242.0.3",
"133.242.0.4"
]
}
],
"DHCPStaticMapping": [
{
"MACAddress": "9C:A3:BA:xx:xx:xx",
"IPAddress": "192.168.0.245"
}
],
"DNSForwarding": {
"Interface": "eth1",
"DNSServers": [
"133.242.0.3",
"133.242.0.4"
]
},
"PPTPServer": {
"RangeStart": "192.168.0.246",
"RangeStop": "192.168.0.249"
},
"L2TPIPsecServer": {
"RangeStart": "192.168.0.250",
"RangeStop": "192.168.0.254",
"PreSharedSecret": "presharedsecret"
},
"RemoteAccessUsers": [
{
"UserName": "username",
"Password": "password"
}
],
"WireGuard": {
"IPAddress": "192.168.0.240/28",
"Peers": [
{
"Name": "client1",
"IPAddress": "192.168.0.242",
"PublicKey": "your-key"
}
]
},
"SiteToSiteIPsecVPN": [
{
"Peer": "192.0.2.1",
"PreSharedSecret": "presharedsecret",
"RemoteID": "192.0.2.1",
"Routes": [
"10.0.0.0/8"
],
"LocalPrefix": [
"192.168.0.0/24"
]
}
],
"StaticRoute": [
{
"Prefix": "172.16.0.0/16",
"NextHop": "192.168.0.21"
}
],
"SyslogHost": "192.168.0.1"
},
"BootAfterCreate": true,
"NoWait": false
}
create-standard
Usage
Usage:
create-standard [flags]
Flags:
=== Common options ===
--name string (*required)
--description string
--tags strings
--icon-id int
=== Vpc-Router-specific options ===
--boot-after-create
--dhcp-server string
--dhcp-static-mapping string
--dns-forwarding string
--firewall string
--internet-connection-enabled
--l2tp string
--port-forwarding string
--pptp string
--private-network-interfaces string
--site-to-site-vpn string
--static-nat string
--static-route string
--syslog-host string
--users string
--version int (*required) (default 2)
--vrid int
--wireguard string
=== Zone options ===
--zone string (*required)
=== Wait options ===
--no-wait
=== Input options ===
-y, --assumeyes Assume that the answer to any question which would be asked is yes
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
Parameter Examples
{
"Zone": "tk1a | tk1b | is1a | is1b | tk1v",
"Name": "example",
"Description": "example",
"Tags": [
"tag1=example1",
"tag2=example2"
],
"IconID": 123456789012,
"Version": 2,
"PrivateNetworkInterfacesData": "",
"PrivateNetworkInterfaces": [
{
"SwitchID": 123456789012,
"IPAddress": "192.168.0.11",
"NetworkMaskLen": 24,
"Index": 1
}
],
"RouterSetting": {
"InternetConnectionEnabled": true,
"PortForwarding": [
{
"Protocol": "tcp | udp",
"GlobalPort": "22",
"PrivateAddress": "192.168.0.11",
"PrivatePort": "22",
"Description": "example"
}
],
"Firewall": [
{
"Send": [
{
"Protocol": "tcp | udp | icmp | ip",
"SourceNetwork": "192.0.2.1 | 192.0.2.0/24",
"SourcePort": "1024 | 1024-2048",
"DestinationNetwork": "192.0.2.1 | 192.0.2.0/24",
"DestinationPort": "1024 | 1024-2048",
"Action": "allow | deny",
"Logging": "True",
"Description": "example"
}
],
"Receive": [
{
"Protocol": "tcp | udp | icmp | ip",
"SourceNetwork": "192.0.2.1 | 192.0.2.0/24",
"SourcePort": "1024 | 1024-2048",
"DestinationNetwork": "192.0.2.1 | 192.0.2.0/24",
"DestinationPort": "1024 | 1024-2048",
"Action": "allow | deny",
"Logging": "True",
"Description": "example"
}
],
"Index": 0
}
],
"DHCPServer": [
{
"Interface": "eth1",
"RangeStart": "192.168.0.240",
"RangeStop": "192.168.0.244",
"DNSServers": [
"133.242.0.3",
"133.242.0.4"
]
}
],
"DHCPStaticMapping": [
{
"MACAddress": "9C:A3:BA:xx:xx:xx",
"IPAddress": "192.168.0.245"
}
],
"DNSForwarding": {
"Interface": "eth1",
"DNSServers": [
"133.242.0.3",
"133.242.0.4"
]
},
"PPTPServer": {
"RangeStart": "192.168.0.246",
"RangeStop": "192.168.0.249"
},
"L2TPIPsecServer": {
"RangeStart": "192.168.0.250",
"RangeStop": "192.168.0.254",
"PreSharedSecret": "presharedsecret"
},
"RemoteAccessUsers": [
{
"UserName": "username",
"Password": "password"
}
],
"WireGuard": {
"IPAddress": "192.168.0.240/28",
"Peers": [
{
"Name": "client1",
"IPAddress": "192.168.0.242",
"PublicKey": "your-key"
}
]
},
"SiteToSiteIPsecVPN": [
{
"Peer": "192.0.2.1",
"PreSharedSecret": "presharedsecret",
"RemoteID": "192.0.2.1",
"Routes": [
"10.0.0.0/8"
],
"LocalPrefix": [
"192.168.0.0/24"
]
}
],
"StaticRoute": [
{
"Prefix": "172.16.0.0/16",
"NextHop": "192.168.0.21"
}
],
"SyslogHost": "192.168.0.1"
},
"BootAfterCreate": true,
"NoWait": false
}
read
Usage
Usage:
read { ID | NAME | TAG } [flags]
Aliases:
read, show
Flags:
=== Zone options ===
--zone string (*required)
=== Input options ===
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
update
Usage
Usage:
update { ID | NAME | TAG }... [flags]
Flags:
=== Common options ===
--name string
--description string
--tags strings
--icon-id int
=== Vpc-Router-specific options ===
--dhcp-server string
--dhcp-static-mapping string
--dns-forwarding string
--firewall string
--internet-connection-enabled
--l2tp string
--port-forwarding string
--pptp string
--site-to-site-vpn string
--static-nat string
--static-route string
--syslog-host string
--users string
--wireguard string
=== Network options ===
--public-network-interface-ip-addresses strings
--public-network-interface-ip-aliases strings
--public-network-interface-virtual-ip-address string
--private-network-interfaces string
=== Zone options ===
--zone string (*required)
=== Wait options ===
--no-wait
=== Input options ===
-y, --assumeyes Assume that the answer to any question which would be asked is yes
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
Parameter Examples
{
"Zone": "tk1a | tk1b | is1a | is1b | tk1v",
"Name": "example",
"Description": "example",
"Tags": [
"tag1=example1",
"tag2=example2"
],
"IconID": 123456789012,
"PublicNetworkInterface": {
"IPAddresses": [
"192.0.2.21",
"192.0.2.22"
],
"VirtualIPAddress": "192.0.2.101",
"IPAliases": [
"192.0.2.102"
]
},
"PrivateNetworkInterfaces": [
{
"SwitchID": 123456789012,
"IPAddresses": [
"192.168.0.11",
"192.168.0.12"
],
"VirtualIPAddress": "192.168.0.1",
"NetworkMaskLen": 24,
"Index": 1
}
],
"RouterSetting": {
"InternetConnectionEnabled": true,
"StaticNATData": "",
"StaticNAT": [
{
"GlobalAddress": "192.0.2.101",
"PrivateAddress": "192.168.0.1",
"Description": "example"
}
],
"PortForwardingData": "",
"PortForwarding": [
{
"Protocol": "tcp | udp",
"GlobalPort": "22",
"PrivateAddress": "192.168.0.11",
"PrivatePort": "22",
"Description": "example"
}
],
"FirewallData": "",
"Firewall": [
{
"Send": [
{
"Protocol": "tcp | udp | icmp | ip",
"SourceNetwork": "192.0.2.1 | 192.0.2.0/24",
"SourcePort": "1024 | 1024-2048",
"DestinationNetwork": "192.0.2.1 | 192.0.2.0/24",
"DestinationPort": "1024 | 1024-2048",
"Action": "allow | deny",
"Logging": "True",
"Description": "example"
}
],
"Receive": [
{
"Protocol": "tcp | udp | icmp | ip",
"SourceNetwork": "192.0.2.1 | 192.0.2.0/24",
"SourcePort": "1024 | 1024-2048",
"DestinationNetwork": "192.0.2.1 | 192.0.2.0/24",
"DestinationPort": "1024 | 1024-2048",
"Action": "allow | deny",
"Logging": "True",
"Description": "example"
}
],
"Index": 0
}
],
"DHCPServerData": "",
"DHCPServer": [
{
"Interface": "eth1",
"RangeStart": "192.168.0.240",
"RangeStop": "192.168.0.244",
"DNSServers": [
"133.242.0.3",
"133.242.0.4"
]
}
],
"DHCPStaticMappingData": "",
"DHCPStaticMapping": [
{
"MACAddress": "9C:A3:BA:xx:xx:xx",
"IPAddress": "192.168.0.245"
}
],
"DNSForwardingData": "",
"DNSForwarding": {
"Interface": "eth1",
"DNSServers": [
"133.242.0.3",
"133.242.0.4"
]
},
"PPTPServerData": "",
"PPTPServer": {
"RangeStart": "192.168.0.246",
"RangeStop": "192.168.0.249"
},
"L2TPIPsecServerData": "",
"L2TPIPsecServer": {
"RangeStart": "192.168.0.250",
"RangeStop": "192.168.0.254",
"PreSharedSecret": "presharedsecret"
},
"WireGuardData": "",
"WireGuard": {
"IPAddress": "192.168.0.240/28",
"Peers": [
{
"Name": "client1",
"IPAddress": "192.168.0.242",
"PublicKey": "your-key"
}
]
},
"RemoteAccessUsersData": "",
"RemoteAccessUsers": [
{
"UserName": "username",
"Password": "password"
}
],
"SiteToSiteIPsecVPNData": "",
"SiteToSiteIPsecVPN": [
{
"Peer": "192.0.2.1",
"PreSharedSecret": "presharedsecret",
"RemoteID": "192.0.2.1",
"Routes": [
"10.0.0.0/8"
],
"LocalPrefix": [
"192.168.0.0/24"
]
}
],
"StaticRouteData": "",
"StaticRoute": [
{
"Prefix": "172.16.0.0/16",
"NextHop": "192.168.0.21"
}
],
"SyslogHost": "192.168.0.1"
},
"NoWait": false
}
update-standard
Usage
Usage:
update-standard { ID | NAME | TAG }... [flags]
Flags:
=== Common options ===
--name string
--description string
--tags strings
--icon-id int
=== Vpc-Router-specific options ===
--dhcp-server string
--dhcp-static-mapping string
--dns-forwarding string
--firewall string
--internet-connection-enabled
--l2tp string
--port-forwarding string
--pptp string
--private-network-interfaces string
--site-to-site-vpn string
--static-nat string
--static-route string
--syslog-host string
--users string
--wireguard string
=== Zone options ===
--zone string (*required)
=== Wait options ===
--no-wait
=== Input options ===
-y, --assumeyes Assume that the answer to any question which would be asked is yes
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
Parameter Examples
{
"Zone": "tk1a | tk1b | is1a | is1b | tk1v",
"Name": "example",
"Description": "example",
"Tags": [
"tag1=example1",
"tag2=example2"
],
"IconID": 123456789012,
"PrivateNetworkInterfaces": [
{
"SwitchID": 123456789012,
"IPAddress": "192.168.0.11",
"NetworkMaskLen": 24,
"Index": 1
}
],
"RouterSetting": {
"InternetConnectionEnabled": true,
"StaticNATData": "",
"StaticNAT": null,
"PortForwardingData": "",
"PortForwarding": [
{
"Protocol": "tcp | udp",
"GlobalPort": "22",
"PrivateAddress": "192.168.0.11",
"PrivatePort": "22",
"Description": "example"
}
],
"FirewallData": "",
"Firewall": [
{
"Send": [
{
"Protocol": "tcp | udp | icmp | ip",
"SourceNetwork": "192.0.2.1 | 192.0.2.0/24",
"SourcePort": "1024 | 1024-2048",
"DestinationNetwork": "192.0.2.1 | 192.0.2.0/24",
"DestinationPort": "1024 | 1024-2048",
"Action": "allow | deny",
"Logging": "True",
"Description": "example"
}
],
"Receive": [
{
"Protocol": "tcp | udp | icmp | ip",
"SourceNetwork": "192.0.2.1 | 192.0.2.0/24",
"SourcePort": "1024 | 1024-2048",
"DestinationNetwork": "192.0.2.1 | 192.0.2.0/24",
"DestinationPort": "1024 | 1024-2048",
"Action": "allow | deny",
"Logging": "True",
"Description": "example"
}
],
"Index": 0
}
],
"DHCPServerData": "",
"DHCPServer": [
{
"Interface": "eth1",
"RangeStart": "192.168.0.240",
"RangeStop": "192.168.0.244",
"DNSServers": [
"133.242.0.3",
"133.242.0.4"
]
}
],
"DHCPStaticMappingData": "",
"DHCPStaticMapping": [
{
"MACAddress": "9C:A3:BA:xx:xx:xx",
"IPAddress": "192.168.0.245"
}
],
"DNSForwardingData": "",
"DNSForwarding": {
"Interface": "eth1",
"DNSServers": [
"133.242.0.3",
"133.242.0.4"
]
},
"PPTPServerData": "",
"PPTPServer": {
"RangeStart": "192.168.0.246",
"RangeStop": "192.168.0.249"
},
"L2TPIPsecServerData": "",
"L2TPIPsecServer": {
"RangeStart": "192.168.0.250",
"RangeStop": "192.168.0.254",
"PreSharedSecret": "presharedsecret"
},
"WireGuardData": "",
"WireGuard": {
"IPAddress": "192.168.0.240/28",
"Peers": [
{
"Name": "client1",
"IPAddress": "192.168.0.242",
"PublicKey": "your-key"
}
]
},
"RemoteAccessUsersData": "",
"RemoteAccessUsers": [
{
"UserName": "username",
"Password": "password"
}
],
"SiteToSiteIPsecVPNData": "",
"SiteToSiteIPsecVPN": [
{
"Peer": "192.0.2.1",
"PreSharedSecret": "presharedsecret",
"RemoteID": "192.0.2.1",
"Routes": [
"10.0.0.0/8"
],
"LocalPrefix": [
"192.168.0.0/24"
]
}
],
"StaticRouteData": "",
"StaticRoute": [
{
"Prefix": "172.16.0.0/16",
"NextHop": "192.168.0.21"
}
],
"SyslogHost": "192.168.0.1"
},
"NoWait": false
}
delete
Usage
Usage:
delete { ID | NAME | TAG }... [flags]
Aliases:
delete, rm
Flags:
=== Delete options ===
-f, --force
=== Zone options ===
--zone string (*required)
=== Error handling options ===
--fail-if-not-found
=== Input options ===
-y, --assumeyes Assume that the answer to any question which would be asked is yes
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
boot
Usage
Usage:
boot { ID | NAME | TAG }... [flags]
Aliases:
boot, power-on
Flags:
=== Zone options ===
--zone string (*required)
=== Wait options ===
--no-wait
=== Input options ===
-y, --assumeyes Assume that the answer to any question which would be asked is yes
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Parameter example ===
--example Output example parameters with JSON format
shutdown
Usage
Usage:
shutdown { ID | NAME | TAG }... [flags]
Aliases:
shutdown, power-off
Flags:
=== Vpc-Router-specific options ===
-f, --force-shutdown (aliases: --force)
=== Zone options ===
--zone string (*required)
=== Wait options ===
--no-wait
=== Input options ===
-y, --assumeyes Assume that the answer to any question which would be asked is yes
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Parameter example ===
--example Output example parameters with JSON format
reset
Usage
Usage:
reset { ID | NAME | TAG }... [flags]
Flags:
=== Zone options ===
--zone string (*required)
=== Input options ===
-y, --assumeyes Assume that the answer to any question which would be asked is yes
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Parameter example ===
--example Output example parameters with JSON format
monitor-cpu
Usage
Usage:
monitor-cpu { ID | NAME | TAG }... [flags]
Flags:
=== Monitor options ===
--end string
--start string
=== Zone options ===
--zone string (*required)
=== Input options ===
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
monitor-interface
Usage
Usage:
monitor-interface { ID | NAME | TAG }... [flags]
Aliases:
monitor-interface, monitor-nic
Flags:
=== Vpc-Router-specific options ===
--index int
=== Monitor options ===
--end string
--start string
=== Zone options ===
--zone string (*required)
=== Input options ===
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Output options ===
--format string Output format in Go templates (aliases: --fmt)
-o, --output-type string Output format options: [table/json/yaml] (aliases: --out)
--query string Query for JSON output
--query-driver string Name of the driver that handles queries to JSON output options: [jmespath/jq]
-q, --quiet Output IDs only
=== Parameter example ===
--example Output example parameters with JSON format
wait-until-ready
Usage
Usage:
wait-until-ready { ID | NAME | TAG }... [flags]
Aliases:
wait-until-ready, wait-for-boot
Flags:
=== Zone options ===
--zone string (*required)
=== Input options ===
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Parameter example ===
--example Output example parameters with JSON format
wait-until-shutdown
Usage
Usage:
wait-until-shutdown { ID | NAME | TAG }... [flags]
Aliases:
wait-until-shutdown, wait-for-down
Flags:
=== Zone options ===
--zone string (*required)
=== Input options ===
--generate-skeleton Output skeleton of parameters with JSON format (aliases: --skeleton)
--parameters string Input parameters in JSON format
=== Parameter example ===
--example Output example parameters with JSON format